·The total height of the railing is 970 millimeters, and the net weight is not less than 12 kilograms

·The railing strap adopts high-strength polyester herringbone pattern tape, which is not deformed or faded, with a length of 2.3 meters and a width of 5 or 6 or 8 centimeters; The color of the pull strap can be customized according to the Pantone color card

·The surface of the railing is made of 304 brushed stainless steel

·The chassis counterweight is made of cast iron frosted parts, and the chassis cover is stamped with 1.2mm stainless steel, with R15 rounded corners (inside). The chassis has a diameter of 350 millimeters and a height of less than 20 millimeters. A rubber pad is installed at the bottom of the chassis, which is bonded with cast iron;

·The strap logo is made of double-sided laser digital printing material

·The railing column is made of 304 brushed stainless steel, with a diameter of 63 millimeters and a wall thickness of 1.2 millimeters;

·Winding material SUS301, specification 0.175x8x3500mm

·The main body of the telescopic sleeve is made of reinforced nylon; The strap head is made of elastic material, and passengers can forcefully pull off the strap in emergency situations; Dimensions of expansion socket: diameter 63mm, height 103mm; The fixed aperture is 1.8mm, and the center of the fixed hole is 91.7mm from the bottom of the cover; The installation position of the upper layer of the tension strap expansion sleeve is the same as that of the conventional single-layer mobile railing, while the lower layer of the tension strap expansion sleeve is installed in the 63 circular pipe column, with a distance of 450mm from the ground (lower end of the tension strap); Fix the telescopic sleeve head with two sets of metal curved compression plates at the front and back, and weld two sets of hooks on the left and right sides.

·The base has a flat surface and is firmly connected to the railing, without falling or loosening

·The pull strap is made of high-strength polyester herringbone pattern, which is not deformed or faded

·The railing is overall flat, free of burrs, and smooth without injuring hands

·The telescopic head is equipped with a safe brake buffer recovery device, which allows the tension strap to slowly retract and avoid injuring passengers due to the rapid retraction of the tension strap.

·The strap head is made of elastic material, and passengers can forcefully pull off the strap in emergency situations.